Felisatti TP115/350VE, Operating Instructions Manual

Page: 4 / 32

TP115/350VE
Voltage and current V / A 230V-1,4A 230V-1,6A
Frequency Hz 50-60 50-60
Absorbed power W 300 350
Unloaded speed /min 10000 6500
Full-load speed /min 6000 6000
Oscillation unloaded /min 20000 13000
Orbit mm 2 4,5
Pad dimensions mm 115x210 115x210
Weight kg 2,9 2,9
Sound pressure emitted Lpa dB(A).(*) 75 70,4
Sound power emited Lwa dB(A).(*) 86 83,4
Vibration level m/s² (*) 4,3 4,9
* Surveys carried out according to standards: EN60745.1 - EN60745.2.4
OPERATING INSTRUCTIONS FOR ORBITAL
SANDER
INTRODUCTION
All FELISATTI portable tools conform with standard
EN60745, 98/37/EC machine directives and following
modifications, with 2006/95/EC, 93/68/EEC and, with
regard to electromagnetic compatibility, the tools
conform with directive EEC/89/336, and with
standards EN55014.1, EN 55014.2, EN 61000.3.2,
EN 61000.3.3 and EN 50366.
The mark on the tool guarantees its
conformity .
If used with the care and serviced regularly, this tool
will provide long-lasting and reliable service. Carefully
follow the instructions contained in this manual, using
them for reference for any eventual controls that may
need to be carried out.
1 GENERAL INFORMATION
1.0 THE AIM OF THIS MANUAL
This manual has been prepared by the Manufacturer
as an integral part of the mitre saw equipment.
The information contained is for the benefit of
professional operators.
This manual defines the purpose for which the mitre
saw was designed, and contains all the information
necessary to ensure safe and correct use. We
therefore recommend reading the manual carefully
before proceeding to any form of adjustment,
operation or maintenance. Constant respect for the
contents of this manual ensures both machine and
operator safety and the most economical and longest
working life of the machine itself. Photographs and
drawings have been supplied by the manufacturer for
exemplifying purposes; with the aim of following
a policy of constant development and product
modernisation, the manufacturer is entitled to make
modifications without forewarning.
1.1 TOOL IDENTIFICATION
The plate located on the left hand side of the tool
identifies the model, the data plate located on
the right hand side of the tool contains the model
references, the technical specifications of the motor
and the constructor.
1.1.1 IDENTIFICATION
A Logotype plate
B Data plate
C Principal handgrip
D Switch
E Switch locking push-button
F Supplementary handgrip
G Base (Pad)
H Suction
I Abrasive paper fixing clamp
1.2 MANUFACTURER – IDENTIFICATION
Interskol Power Tools S.L.
Carretera de Sant Joan de les Abadesses
s/n17500 RIPOL, (Girona), SPAIN
Tel +34972700200 - Fax +34972700554
E-mail: e-mail: felisatti@interskol.es
2 TECHNICAL CHARACTERSTICS
2.1 TECHNICAL DATA
Model TP517/AS