Felisatti RS135, Original Instruction Manual

Page: 11 / 116

11
Noise and Vibration Emissions
4
1. Noise emission
2. The operator to wear hearing protection
3. Vibration emission
4. The following information
5. A warning
The A-weighted sound power level (L
WA
)
The A-weighted emission level (L
pA
)
Uncertainty (K)
97 dB(A)
86 dB(A)
3 dB
1) Noise emission
Measured values are according to EN 60745-2-11
The declarde vibration total value has been measured in accordance with a standard
test method given in EN60745-2-11 and may be used for comparing one tool with another.
The declard vibration total value may also be used in a preliminary assessment of exposure.
The vibration emission during actual use of the power tool can differ from the
declared total value depending on the ways in which the tool is used.
Identify additional safety measures to protect the operator that are based on an estimation of
exposure in the actual conditions of use (taking account of all parts of the operating cycle such
as the times when the tool is switched off and when it is running idle in addition to the trigger time).
Vibration total values(triaxial vector sum) determined according to EN 60745-2-11
Vibration emission value(a
h, cw
)
Uncertainty (K)
Cutting wood
14.5 m/s²
1.5 m/s²