Inserting The Saw Blades
CAUTION!
Used cutting accessories may be come hot. Wear protective gloves! Select a saw .Used
cutting accessories may be come hot. Wear protective gloves! Select a saw.
1.
Open the tool holder lock and press down.
2.
Insert the saw blade into the tool holder and push in as far as it will go.
3.
Close the tool holder lock.
Adjusting The Cutting Support
WARNING!
Remove the battery before
making any adjustments
on the power tool.
The cutting support should always rest on the material when sawing so as to avoid excessive vib-
rations.
1.
Press the cutting support lock down.
2.
Adjust the cutting support to the required depth.
3.
Release cutting support lock.
General Operation
WARNING!
Always hold the power tool
firmly with two hands.
Whenever possible, clamp the workpiece to be cut in a vice
. This gives the
saw a cutting support.
This
also
helps to reduce vibration.
After the Reciprocating Saw
has been switched off, the saw
blade continues
to
run briefly.
Never touch the saw blade straight after use as it may be very hot.
Cutting Metal
When sawing metal, use lubricant along the cutting line. This
prevents
the material from
overheating.
Cutting Wood
Place the saw square on the workpiece. Guide the saw with uniform pressure through the wood,
pressing the cutting support against the workpiece in the process.
8
9