Felisatti P52246 Manual Download Page 11

Service

1. Have your power tool serviced by a qualified repair per

son using only identical replacement parts.

This will ensure that the safety of the power tool is maintai

ned.

2. Follow instruction for lubricating and changing accessories.
3. Keep handles dry, clean , and free from oil and grease.

Transport

The contained lithium

-

ion batteries are subject to the Dangerous Goods Legislation requirements. 

The user can transport the batteries by road without further requirements.

When  being  transported  by  third  parties  (e.  g.:  air  transport  or  forwarding  agency),  special 

requirements on packaging and  label must  be  observed.  For  preparation of the item  being  shipped, 
consulting an expert for hazardous material is required. 

Dispatch batteries only when the housing is undamaged. Tape or mask off open contacts and pack up 

the  battery  in  such  a  manner  that  it  cannot  move  around  in  the  packaging.  Please  also  observe 
possibly more detailed national regulations.

Disposal

The  machine,  rechargeable  batteries,  accessories  and  packaging  should  be  sorted  for 

environmental-friendly recycling. Do not dispose of power tools and batteries/rechargeable batteries 
into household waste!

11

Summary of Contents for P52246













Reviews: