HNC 47.82
33
Setup and installation
8.8
Software
Download / Installation
1.
Download the Eding CNC Software and instruction manual from the manu-
facturer (
).
2.
Install the Eding CNC software on to the PC following the manufacturers
instruction manual.
3.
Download configuration file (
).
4.
Extract Zip folder.
5.
Replace "cnc.ini" and "Spindle-0-pwmCompTable.txt" in the installation
directory (C:\CNC4.03 is the default).
8.8.1
Connection to external software
If another software other than Eding CNC and as such a different controller is to
be used, then the following parameters in the software can be set. This informa-
tion is to be treated as a recommendation and not as a guarantee that the
machine will function correctly with a different controller. Additional parameters:
Chapter 5 ‘Technology Data’ on page 13
0
5
))"!
2#
E
)
E
0
.
E
)
E
0
&
0
D
)
E
0
&
0
D
)
E
0
.
C
)
E
0
&
0
C
)
E
0
.
@
/
.
/
.
@
/
.
/
.
@
/
.
/
.
@
/
.
/
.
4
$
/
%
.
"
(
0!
/
.
(
!
&
(
!
&
(
!
&
(
!
&
(
!
&
(
!
&
(
!
&
(
!
&
)E
)
E
0
.
)
E
0
&
0
Fig. 16: Pin assignment (details see wiring diagram)
Note:
The stated performance of the machine can only be achieved
through the use of the Eding Controller and software. If using
other controllers and software, the performance of the machine
may be reduced.
