24
"
#
!
!
#
#
!
"
Bandsaw
FB 510/610/710 & FB 710 c-tech
Note::
Ceramic bandsaw blade guide
FB 510 / 610 = Option / FB 710 = Standard
Accessories - Order no.: 423-037 / 423-038
See assembly instructions: 423033-901
Fig. 7-6: Saw blade guide
!
Bearings
"
Support roller
#
Clamping screws
The side guide rollers should touch the saw blade slightly
so as to obtain a straight and vibration-free cut.
The rear support roller prevents the saw blade thrusting
backwards whilst cutting.
To adjust the position of the rollers, simply loosen the
clamping screw.
7.5 Adjusting the saw blade guide
The upper saw blade guide has to be lowered as closely
as possible to the work-piece (5–10 mm). To set the
height, open the clamping screw and turn the hand
wheel until the desired height has been reached. Tighten
the clamping screw once again.
Fig. 7-5: Bearings
Warning! Risk of injury!
Do not change settings whilst the machine is in operation!
!
Clamping screws
"
Blade guide height adjustment
7.5.1 Height adjustable protection device
7.5.2 Saw blade guide up / down
Operation