05
www.feiyu-tech.cn
Balance Adjustment of the Roll Axis
2
* After adjustment, be sure to tighten the roll axis knob ring
Level Ground
(1) Stand the gimbal on level ground.
(2)
Loosen
the roll axis knob ring
（Slightly loose until the roll arm can be moved）
(3)
Move and adjust the position of roll arm,
until the
camera is parallel to the level ground.
( Refer to lever principle )
(4)
Tighten
the roll axis knob ring
After adjustment
Camera is parallel
to the level ground
Cross Arm
Roll axis knob ring
Loosen
Move
Cross Arm
Roll axis knob ring
Loosen
Move
Steps
