Gimbal Initialization
Adjusting Steps
Tap the function button for 5 consecutive times
and hear the "beep" sound, and the motor will
stop working and "Initing" shows up.
After the initialization is done, single tap the function
button to wake up and return to the main interface.
Place the gimbal on the table unmoved, and the
gimbal automatically detect whether or not it is
placed on a static flat surface, and then its
initializing will start automatically showing "Initing"
on the display, and "Success" will be displayed after
the initializing has been successfully completed.
NOTE:
If the initialization is not successful for a long
time, long press the function button to turn
off the gimbal,restart it and then initialize.
You can initialize your gimbal when:
（1） When camera is not level
（2） If not used for a long period of time
（3） In case of extreme temperature variations
1
2
3
Five tap
Single tap
Initing
Display
Initing
Success
Display
14
www.feiyu-tech.com
