3. Usage for focus motor
⑥ Connection:
Connect the focus
motor power port to an extension
port which on the fixed plate via
cable.
※ After the installation is
complete, please balance the
gimbal before turn it on.
⑥
M button operation
Indicator
Single tap
Calibrate automatically ( Focus motor rotate the focus gear strip
to mechanical limit automatically, and then rotate in opposite
direction to reach the other mechanical limit)
Double tap
Calibrate by hand*(Turn the multifunction knob to control the
focus motor reach the starting point on the lens, and turn it to
reach the end point, single tap M button again to finish.
Triple tap
Knob control the focus motor inversely
Long press
Indicator on/off
Indicator 1
Indicator 2
Indicator 3
M button
Indicator 1 Blinks once slowly
Not calibrated yet
Indicator
Status
Description
Blinks once quickly Calibrating
Turn off
Keeps on
Controlling by gimbal
Keeps on
Control inversely
Calibration complete
Indicator 2
Indicator 3
*For lenses without a mechanical limit, please calibrate it by hand.