Guilin Feiyu Electronics Co., Ltd.
http://www.feiyudz.cn Email:[email protected]
3
a)
To activate the different flight modes, use a free Receiver channel (e.g. Channel 5) to
output the appropriate signal to FY30A.
b)
Use a 2 way-switch from your RC radio as in the example below:
c)
If you do not connect the Switch channel with your RC Receiver or FY-30A does not
detect any incoming signal through this input channel, it will automatically engage
Mode 1- Auto Stabilization Mode. However, we do not suggest flying the unit with
no signal input to the Switch Channel.
d)
Please note that even though there are Throttle Input and Throttle Output from the
FY30A, the system does not control the Throttle to hold the altitude, you must
always control the Throttle to
keep flying altitude.
Flight Modes
MODE 1
MODE 2
Receiver signal output
900-1800uS
1800-2100uS
FY30A Function
Auto Stabilization mode
3D Mode
RC Receiver Signal output:
Switch setting example
900-1800us Auto Stabilization
1800-2100us 3D Mode
