46
www.feiyu-tech.com
Balanced
①
③
Slide the cross
arm left to adjust
Slide the cross
arm right to adjust
紧
松
紧
松
Camera rightward
Camera leftward
②
Balance Adjustment of the Rolling Axis
3.2
When the balance adjustment of tilting axis completed, the balance of the rolling axis
can be adjusted:keep the gimbal socket connector vertical to the ground with the hand
-held control handle as shown infigure ①, leave the gimbal powered off and observe the
balance. Loosen the lock screw and slide the cross arm left and right to adjust the roll
(refer to figure ② ③).
* After adjustment, be sure to tighten the lock screw.