WWW.FEIT.COM
6
Light Operation Settings:
Battery Replacement
BATTERY WARNING:
Risk of fire, explosion, and burns. Do
not disassemble, crush, heat above 100º C / 212º F or incinerate.
REPLACE ONLY WITH one Lithium-Ion 18650 3.7 V minimum 2200
mAh battery. DISPOSE OF USED BATTERY PROMPTLY. KEEP
AWAY FROM CHILDREN. DO NOT DISASSEMBLE AND DO NOT
DISPOSE OF IN FIRE.
To replace the battery, detach the flood light (AA) from the back plate. Unscrew the battery cover from the back of
the flood light (AA), remove the old battery and insert a new Lithium-Ion 18650 3.7 V minimum 2200 mAh.
Make sure to securely screw the battery cover back in place.
D2D
Auto
Dual
• Wet location rated
D2D
Optimal height for motion
detection is
8
feet.
8 ft.
20 ft./ 50 ft.
(DUAL/ AUTO)
Light turns on for 6 hours at low brightness and turns off automatically.
AUTO
DUAL
Light turns on at 100% brightness (based on battery voltage) for 2 minutes.
Motion range is 50 ft. at dawn. If light is constantly triggered, there will be three
lumens of brightness - 100% light for 2 minutes, 80% light for 2 minutes and
60% light for 2 minutes.
Light turns on at 100% brightness when motion is triggered. Reduces to 30%
after 2 minutes. If no motion is detected after another 2 minutes the light will
turn off. Each time motion sensor is triggered, the fixture will turn on at 100%
brightness.
The switch is located
at the bottom of the
motion head.
