Replacing the battery
□
To replace the rechargeable battery, remove the lid on the side of the spotlight (AA) by unscrewing the
lid screws (2) using a Phillips head screwdriver.
□
Replace with a new lithium-ion 18650 3400mAh 3.7V minimum 12.58Wh or greater.
Install battery correctly with regard to the polarity (+ and -).
□
Reattach the lid by securing the (2) screws using a Phillips head screwdriver.
WWW.FEIT.COM
7
Battery Replacement
1
AA
Troubleshooting
The battery is not fully charged.
The panel is near an external light
source that is inadvertently
triggering the dusk to dawn sensor.
The lights go out too early. The battery charge is low.
Ensure the solar panel is positioned in a
location that provides full and direct
sunlight. If installed in a shady area, the
battery will take a longer time to charge,
and may not fully charge, and reduce
working hours.
Allow the battery to get a full charge by
powering off the fixture for 1-2 days. Or
relocate the panel to an area with direct
sunlight. Check panel for dirt, damage, or
light obstruction.
Relocate the panel to an area that does not
have any external light sources or remove
the external light sources from the panel’s
proximity.
PROBLEM
POSSIBLE CAUSES
CORRECTIVE ACTION
The light will not turn on.
The battery is not making contact.
Loosen the battery cover screws, pull out
the battery cover and inspect the battery
connection. After inspection, reinsert the
battery.
