IMPORTANT:
Do not push on the spotlight
(AA) or you may damage the device.
IMPORTANT:
Do not push on the solar panel
(CC) or you may damage the device.
Spotlight Installation
Solar Panel Ground Stake Installation
Installing the stake
□
Push the spotlight ground stake (BB) into the ground. Using rubber mallet, insert spotlight ground stake (BB) deep
enough into the ground to ensure fully assembled spotlight (AA) is stable and does not tip over.
1
Installing the solar panel ground stake
□
Select a location with full direct sunlight and push the solar panel ground stake (DD) deep enough into the
ground to ensure that fully assembled solar panel (CC) will be stable and will not tip over.
1
Installing the solar panel
□
Slide the cables coming from the spotlight through the opening on the side of the
solar ground stake (DD).
□
Screw the solar panel (CC) onto the solar panel ground stake (DD) by rotating it clockwise.
2
Installing the spotlight
□
Slide the cables coming from the spotlight through the opening on the side of the
spotlight ground stake (BB).
□
Align the spotlight ground stake (BB) with the locking mechanism on the inside of the
spotlight (AA).
□
Slide the spotlight (AA) downward until it sits squarely on the stake.
□
Rotate the spotlight (AA) clockwise to lock in.
2
Removing the insulating tab
□
The light will not operate without pulling out the insulating tab.
3
BB
BB
AA
4
WWW.FEIT.COM
DD
NOTE:
When installing product in hard or dry
soil, water the soil several hours beforehand to
make the installation easier. You can also
break up the ground lightly with a stake or a
fork. Don’t force stake into the ground as
excess force can break or bend the stake.
NOTE:
Adjust the solar panel manually,
to a position best suited for maximum direct
sunlight.
DD
Slot
Slot
CC
