WWW.FEIT.COM
6
Operation with Remote
(sold separately)
Operating with a OneSync Remote allows for expanded control. Modify settings of individual OneSync fixtures or multiple fixtures in groups.
The OneSync Remote has a 100ft control range and will command all paired fixtures within 100ft of the remote.
All OneSync fixtures are equipped with a signal repeater that will repeat any remote commands to all other fixtures within 100ft. Placing
fixtures within 100ft of at least one other fixture creates a control network and allows for unlimited remote control range, as long as there is a
functioning OneSync fixture within 100ft to relay the command.
Example:
You can install a OneSync fixture, then another OneSync fixture 100ft away from the first unit. Continue to install 3 more OneSync
fixtures in this way so that the last fixture is 500ft away. Using this relay technology, the remote will control the farthest fixture that is 500ft away.
Entering pairing mode
□
Hold down the pairing button on the fixture for 3 seconds. Once the
spotlight (AA) starts to blink slowly it is in pairing mode. The spotlight
(AA) remains in pairing mode for three minutes until successfully
paired or timed out.
1
Pairing the remote to the fixture
□
While the spotlight (AA) is in pairing mode, press and hold the
desired Groups button (1, 2, 3, 4, 5 or 6) for 3 seconds to pair the
remote to the selected group.
The light will flash to indicate successful pairing, and the fixture
will exit pairing mode.
2
Unpairing the fixture from the remote
□
To unpair, first follow step 1 so that the fixture is in pairing mode. Once the fixture is in pairing mode, on the OneSync Remote,
press the pairing group button and hold the power button for 3 seconds.
□
The light will flash to indicate successful unpairing, and the fixture will exit pairing mode.
□
To unpair fixture from all groups at once, hold down button on the OneSync fixture for 10 seconds.
It will flash to indicate that all groups have been unpaired from the fixture.
3
1
2
3
4
5
6
2hr
4hr
8hr
Timer
Groups
LOW
HIGH
RGB
On/Off
OneSync Remote
Select Group
Colors Cycle
Brightness
Level
Selectable
White Color
Cycle
Set Daily Timer
NOTE:
The remote comes equipped with a universal Group #1. To create unique groups, pair using Groups #2-6.
All fixtures are pre-paired to the universal Group #1 so that they will immediately respond with any remote
Group #1 command. To not operate on this universal group, follow the unpairing instructions in Step 3.
Downloading and installing the Feit Electric app
□
Search for the Feit Electric app in the App Store or Google Play Store.
□
Download and Install the Feit Electric app on your smart device.
□
Connect to a 2.4GHz Wi-Fi network that covers your installation location.
□
Follow the instructions in the Feit ELectric app & Smart Bridge manual
to pair your OneSync lights.
1
Operation with Smart Bridge
Only supports
2.4GHz Wi-Fi
Networks
Feit Electric App
