FEISHEN K550ATV EEC 4x4, Owner'S Manual

Page: 74 / 102

WARNING
Improper adjustment of the handlebars or incorrect torquing of the adjuster block
tightening bolts can cause limited steering or loosening of the handlebars, resulting in
loss of control and possible serious personal injury or death.
Handlebar Adjustment
Your ATV has handlebars which
can be adjusted for your personal
fit.
1. Remove the handlebar cover.
2. Loosen the four bolts.
3. Adjust handlebar to desired
height. Be sure handlebars do
not hit gas tank or any other part
of machine when turned fully to left or right.
4. Torque handlebar adjuster block to 10-12 ft. lbs. (14-16 Nm)
NOTE: Tighten bolts so there is an equal gap at the front and rear of the handlebar
block. Improper gap will result in improper fit of upper pod.