Fein WSG14-125, Operating Instructions Manual

Page: 18 / 82

18
EN
Operating instructions.
Press the locking button only when the motor is
stopped. (see page 5)
Pay attention that the grinding accessory is properly cen-
tred between the inner flange and the threaded flange.
(see page 6)
Repair and customer service.
Blow out the interior of the power tool at
regular intervals from outside through the air
vents with dry, compressed air.
WSS 14: Unscrew the clamping unit by hand to protect
it from damage and dirt.
If the supply cord of this power tool is damaged it must
be replaced by a specially prepared cord available
through the FEIN customer service centre.
If required, you can change the following parts yourself:
Application tools, auxiliary handle, wheel guard, clamping
unit or flanges.
Warranty and liability.
The warranty for the product is valid in accordance with
the legal regulations in the country where it is marketed.
In addition, FEIN also provides a guarantee in accordance
with the FEIN manufacturer’s warranty declaration.
Only part of the accessories described or shown in this
instruction manual will be included with your power
tool.
Declaration of conformity.
FEIN declares itself solely responsible for this product
conforming with the documents and standards given on
the last page of this Instruction Manual.
Environmental protection, disposal.
Packaging, worn out power tools and accessories should
be sorted for environment-friendly recycling.
3 41 01 088 06 0.book Seite 18 Dienstag, 13. November 2007 3:20 15