MVK 01/06
All rights reserved by FEIN, in particular as these apply to trademarks.
FEIN retains all powers of disposition such as copying and right of transfer
.
FRT: EVO WSB and WSG - Variants
45/118
5.3. Assembling the gear plate
1.
Image: Disassembled parts.
2.
Layering of spring columns (540).
3.
Insert the spring column (540), thrust piece (550) and pressure plate
(560) into drive shaft (530). Using the split pin driver and mandrel press,
Push the pressure plate downwards until it stops. Insert snap ring (570)
> checl position!
4.
Image: Insertion position of snap ring (570).
5.
Press drive shaft (530) onto grooved ball bearing (520).
6.
Lay closing plate (580) onto gear (285). Press drive shaft (530) with
grooved ball bearing (520) onto gear (285).
7.
Press (530) up to stop.
8.
Press grooved ball bearing (520) into bearing seat of bearing plate (510).
Tools:
•
Mandrel press
•
Split pin driver Ø=7
1.
2.
3.
4.
6.
5.
7.
8.