11
en
Assembly instructions.
Before mounting or replacing application tools or accessories, pull the power
plug.
This preventive safety measure rules out the danger of injuries through
accidental starting of the power tool.
Mounting the sanding arm and sanding
belt (Fig. 2–6).
➤
Unscrew the fastening screw until the
lid can be removed. (Fig. 2)
➤
Mount the sanding arm and fasten it
with the adjusting screw. (Fig. 3)
➤
Mount the sanding belt around the
rear drive roller. (Fig. 4)
➤
Now, mount the sanding belt around
the front guide roller. For this, push the
sanding arm toward the motor housing.
(Fig. 5)
➤
Mount the lid and tighten the fastening
screw. (Fig. 6)
WARNING
Fig. 2
Fastening
screw
Lid
Fig. 3
Sanding arm
Adjusting screw
Fig. 4
Drive roller
Guide roller
Fig. 5
Sanding belt
Guide roller
Fig. 6
Fastening
screw
Lid
3 41 01 134 21 0.book Seite 11 Freitag, 15. Mai 2009 11:38 11
