AWBP 10
7. Fitting
C-SC_CSSM
Version 1.0
2015-05-22
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation
.
Page
26
of
35
Fitting the motor
PLEASE NOTE:
Incorrect fitting may result in damage
If you fit the motor incorrectly, you risk damaging it.
Use an arbor to push in the motor’s shaft.
1. Push the grooved ball bearing (1) onto the motor.
2. Fit the air guide ring (3) in the right position on the motor.
3. Insert the two cables (2) into the recesses on either side of the air guide ring.
4. Thread the individual wires (4) from the cable into the recess.
5. Connect the plug (5).
Tools:
- Arbor press
- Arbor
1
5
4
2
3
