16
en
Mounting the angle head (ASW 18-18/ASW 18-18 PC/ASW 18-30 PC/
ASW 18-45 PC/ASW 18-60 PC) (figure 6).
Loosen the clamping sleeve with the hook
wrench and remove it.
Clean the mounting surface using a clean cloth
and a degreasing solvent. Apply retaining
compound to the threads.
Pay attention that the threads are grease-
free before applying the retaining com-
pound.
Slide the clamping sleeve onto the angle head
and then fasten the securing ring.
Mount the angle head to the neck of the
power tool and pull the clamping sleeve
toward the rear. Lock the clamping sleeve
with the hook wrench.
Additional information: Further information
on replacement of the output can be found
on the Internet under www.fein.com.
1.
2.
3.
5.
4.
7.
8.
9.
6.
ASW 18-30 PC
ASW 18-45 PC
ASW 18-60 PC
6.
ASW 18-18
ASW 18-18 PC
M = 15-20 Nm
10.
24
6 29 08 014 00 0
6 29 08 014 00 0
Clamping sleeve
Hook spanner
Fig. 6
Angle head
Clamping ring
OBJ_BUCH-0000000252-002.book Page 16 Friday, July 14, 2017 9:34 AM
