MVK 11 / 02
Alle Rechte bei FEIN, insbesondere für den Fall der Schutzrechtsanmeldung.
Jede Verfügungsbefugnis wie Kopieren und Weitergaberecht liegt bei FEIN
.
4.1.1. Adjustment ring, ASB 14
1.
2.
4.
3.
5.
90°
6.
FEIN - Repair - Tool
1.
Place start-up disk on the gear housing.
2.
Place the pre-tension spring on the gear housing.
3.
Align the adjustment ring and the two-stage pre-tension nut
(large nut on hammer symbol) and turn in
(! Left-handed thread).
4.
Place the adjustment on the gear housing with the pre-
tension nut turned in completely.
5.
Turn the adjustment ring open by approx. 90°.
6.
Place the cover disk in the correct position and screw down
with four screws (0.6-0.8 Nm).
7.
Check the adjustment ring and drive shaft for soft running.
Tools:
•PH2 cross-slotted
screw-driver
• tweezers
