Fein ABS 12, Manual

Page: 32 / 37

MVK 11 / 02
Alle Rechte bei FEIN, insbesondere für den Fall der Schutzrechtsanmeldung.
Jede Verfügungsbefugnis wie Kopieren und Weitergaberecht liegt bei FEIN
.
7.3. Switch check
FEIN - Repair - Tool
Switch test:
- Disconnect the motor
(50)
from the gear unit
(40) .
- Disconnect the motor
(50)
from the switch
(60)
.
- Connect approx. 15 cm of cable to the switch
(60)
on the motor side
and pass it out again on the drill chuck side.
- Connect cable passed out to a lamp bulb (e.g. 12V car lamp).
- Place upper part of housing.
- Push on the battery.
- Check functions.
Observe: Middle position of the change-over switch blocks the switch
pusher.