Sahre / MVK 01.07
All rights reserved by FEIN, in particular as these apply to trademarks.
FEIN retains all powers of disposition such as copying and right of transfer
.
FRT: FMM 250 / FMM 250 Q
5.4. Assembly: Armature - Gear head
1. Press the completed armature with the pressing-on device on
the mandrel press into the gear head
-
Caution !!!!!!
- The armature has to be placed onto
the case centrically, otherwise the
bearing fitting is destroyed during the pressing in ( Burr )
-
Caution !!!!!!
- Observe the position of the
fork during the pressing in (centred )
