GWP 10
6. Removal
C-SC_CSSM
Version 1.0
2016-02-02
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation
.
Page
13
of
39
Removing the carbon brushes and carbon brush holders
1. Loosen the two screws (1) and pull out the stranded wires.
2. Actuate the terminal (2) and simultaneously pull out the stranded wire (3).
3. Remove the cable grommet (4).
Tools:
- PH1 cross-tip
screwdriver
- Slotted screwdriver
(small)
1
3
2
4
