GWP 10
7. Fitting
C-SC_CSSM
Version 1.0
2016-02-02
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation
.
Page
37
of
39
Fitting the handle
1. Position the cover (1).
2. Position all electronic components in the handle half shell.
3. Lay all cables.
4. Insert the cable clamping piece (2) and use the screw (3) to screw it in place [0.7
+0.1
Nm].
5. Fit the second housing half.
6. Tighten the two screws 9x22 (4) [1.2
+0.2
Nm].
7. Tighten the screw 4x30 (5) [1.2
+0.2
Nm].
8. Fit the switch pushbutton (6) and use the countersunk screw (7) to fasten it [0.6
+0.2
Nm].
Tools:
- PH1 cross-tip
screwdriver
- PH2 cross-tip
screwdriver
7
5
6
3
2
4
1
