Bulb Replacement:
15
Fein
Place the new LED bulb (part# RB20-001) on to
the LED bulb platform and attach using the small
set screws that were previously removed.
Insert the black plastic wire plug back into
the wire housing.
With the LED bulb replaced, position the
bottom of the microscope plate back onto
the microscope frame. Using a screw driver,
secure the bottom plate with the 4 set screws.
Place the 4 rubber feet over the top of the 4
set screws.
LED replacement bulb part #RB20-001
Return the microscope to its upright position.
Plug the microscope back in, power on, and
adjust the rheostat control as needed.
www.feinoptic.com
Fein
