Mi50 Inverted Microscope Operation Instructions
4
Fein
Do not shake or drop the microscope.
Do not expose the microscope
to direct sun, high temperatures,
high humidity, dust, or damp
environments. Use a flat work surface.
When moving the microscope use both hands, holding the handle at the back
(1) and the frame at the front (2) as shown in the image at right. Do not carry by
holding stage.
Set the power switch (4) to off “O” before replacing a bulb or fuse, and wait until the
lamp is cool. The power switch is located on the side of the microscope. Microscope
uses 12v, 100w Halogen bulb. (Part #12v100wH).
Voltage range of 100~240V is supported. Use the power cord supplied with the
microscope.
When working make sure there is plenty of room for heat dissipating around the
light source (3).
Operating indoor temperature should be 5
°
C~40
°
C (41
°
F~104
°
F), with a max
relative humidity of 80%.
