OBID i-
scan
®
Installation
ID ISC.LRU3000
FEIG ELECTRONIC GmbH
Page 39 of 52
LRU3000 - Manual.doc
E N G L I S H
9.2.6 RS485-Interface on X6
The connection of the RS485 interface take place via the X6 connector as well.
The interface parameter can be configured via software protocols.
Fig. 10 RS485 interface pin-outs on X6 (RS485-Interface):
Abbreviation
Description
GND
RS485 – GND
A-
RS485 – (A -)
B+
RS485 – (B +)
Table 10: RS485 interface pin-outs
9.2.6.1 Address assignment of RS485 for bus operation
For bus operation the Reader can be assigned the required bus address via software.
The address is assigned by the host computer. The software is used to assign addresses “0”
through “254” to the Reader.
Note:
Since all Readers are factory set with address „0“, they must be connected and configured
one after the other.
