OBID i-
scan
®
Installation
ID ISC.LRU3000
FEIG ELECTRONIC GmbH
Page 37 of 52
LRU3000 - Manual.doc
E N G L I S H
9.2.3 USB – Interface X3 (Host Communication)
The USB socket on the board is terminal X3. The pinout is standardized. The data rate is reduced
to 12 Mbit (USB full speed). A standard USB-cable can be used.
Fig. 6 USB-Interface for host communication
Note:
The length of the USB-cable can be a max. of 5m (20 inch). It is not allowed to use longer
cables.
9.2.4 USB – Interface X4 (WLAN)
The USB-Port X4 can be used for a standard WLAN-USB-Stick
Fig. 7 USB-Interface for external WLAN interface
Note
It is possible to use standard WLAN-USB-Sticks. It must be ensured that this stick contains
a „Ralink“ Chipsatz „RT2500 USB“ or „RT73“.
For example the following WLAN-Stick are successfully tested with the ID ISC.LRU3000:
Manufacturer
Description
Model
Gigabyte
Air Cruiser G USB Adapter
GN-WBKG
ASUS
USB2.0 WLAN Adapter
WL-167G
Linksys
Compact Wireless-G USB Adapter
WUSB54GC
Table 9 Successfully tested WLAN Sticks.
