IDENTIFICATION
ID ECCO:Lite
4 Product Description
Page 8 of 23
4 Product Description
Product Description
The ID ECCO:Lite captures and stores barcodes data for a variety of uses and transmits those to a host via
USB connection or Bluetooth. This document provides a basic instruction for using the ID ECCO:Lite device.
Fig. 1: ID ECCO:Lite device overview
Label
Description
Function
1
Green LED
Lights up green when ID ECCO:Lite is turned ON.
When the battery level is low, it flashes every 2 sec.
2
Yellow LED
Lights up yellow while barcode reader is on.
Is off if a read was successful.
3
Red LED
Lights up red if connected to a battery charger (USB or power adapter).
Red = Battery charging
Off = Battery fully charged
4
Blue LED
Is flashing for 2 seconds when the device is booting (initializing Bluetooth).
Lights up blue when Bluetooth initialization failed (wait for the device to
power off, then restart).
Lights up blue when ID ECCO:Lite is connected to Bluetooth.
5
Key 1
(trigger button)
Power ON and Scan
Batch mode
Press for 1 second to power on the device. The device will immediately start
the barcode laser to read a barcode. Captured barcodes will be stored in the
device memory.
Bluetooth mode
Press for 1 second to power on the device. The blue LED (4) will flash for 2
seconds to initialize Bluetooth.
Bluetooth connected
Blue LED (4) constantly on.
