OBID
i-scan
®
Installation
ID ISC.MR101-USB / ID ISC.PR101-USB
FEIG ELECTRONIC GmbH
Page 17 of 20
M50805-4e-ID-B.doc
6.3. USA
6.3.1. FCC
FCC ID PJMMR101-PR101
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two con-
ditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Warning: Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
Installation with FCC Approval:
FCC -NOTICE: To comply with FCC Part 15 Rules in the United States, the system must be
professionally installed to ensure compliance with the Part 15 certification. It is the respon-
sibility of the operator and professional installer to ensure that only certified systems are
deployed in the United States. The use of the system in any other combination (such as
colocated antennas transmitting the same information) is expressly forbidden. This device
has been designed to operate with the antennas listed below. Antennas not included in this
list are strictly prohibited for use with this device. The required antenna impedance is 50
ohms. An SMA socket is provided on the circuit board for connecting the external antenna.
Article No.
Part No.
1663.000.00
ID ISC.ANT340/240-A
2396.000.00
ID ISC.ANT340/240-B
Table 8: Antennas with FCC Approval
6.3.2. UL
