OBID
i-scan
®
Installation
ID ISC.MR101-USB / ID ISC.PR101-USB
FEIG ELECTRONIC GmbH
Page 16 of 20
M50805-4e-ID-B.doc
When properly used this radio equipment conforms to the essential requirements of Article 3 and
the other relevant provisions of the R&TTE Directive 1999/5/EC of March 99.
Equipment Classification according to ETSI EN 300 330 and ETSI EN 301 489: Class 2
6.2. Canada (IC)
IC Certification Number: 6633A-MR101
This Class B digital apparatus complies with Canadian ICES-003.
Installation with IC Approval:
IC-NOTICE: To comply with IC Radio Standards in Canada, the system must be professio-
nally installed to ensure compliance with the IC certification. It is the responsibility of the
operator and professional installer to ensure that only certified systems are deployed in
Canada. The use of the system in any other combination (such as colocated antennas
transmitting the same information) is expressly forbidden. This device has been designed
to operate with the antennas listed below. Antennas not included in this list are strictly pro-
hibited for use with this device. The required antenna impedance is 50 ohms. An SMA so-
cket is provided on the circuit board for connecting the external antenna.
Article No.
Part No.
1663.000.00
ID ISC.ANT340/240-A
2396.000.00
ID ISC.ANT340/240-B
Table 7: Antennas with IC Approval
