OBID
i
-scan
System-Manual
ID ISC.LR2000
FEIG ELECTRONIC GmbH
Page 85 of 184
H60700-3e-ID-B.doc
4.31. CFG49: Notification Channel
Byte
0
1
2
3
4
5
6
Contents
MODE
TIME-
TRIGGERED
-TIME
DATA-
SETS_LIMIT
0x00
KEEP-ALIVE
KEEP-ALIVE-TIME
Default
0x00
0x01
0x00
0x00
0x00
0x02
0x58
continuously
1s
255
Off
600s = 10min
Byte
7
8
9
10
11
12
13
Contents
DEST-IP-ADDRESS
DEST-IP-PORT
HOLD-Time
Default
0x00
0x00
0x00
0x00
0x00
0x00
0x01
MODE:
Defines the basic settings for the notification channel.
Bit:
7
6
5
4
3
2
1
0
Function
ACK
0
0
0
0
0
DATA-TRIGGER
DATA-TRIGGER:
(OperatingMode.NotificationMode.Transmission.NotifyTrigger)
b00:
continuously
b01:
time-triggered
b10:
8.8. [0x34] Force Notify Trigger
The trigger definition is only for data records. In continuous and time-triggered mode, in-
put/status events, if enabled in
4.12. CFG11: Read Mode /Scan Mode – Read Data
lected in
4.13. CFG12: Read Mode - Filter
, are notified always immediately. If host-triggered is
enabled, the notification is activated by host command and all collected data, input and status
events are notified together. For detailed message conditions, see
. The
message format is described in
8. Protocols for Buffered Read Mode and Notification Mode
ACK:
Acknowledge Notification
(Operating-
Mode.NotificationMode.Transmission.Enable_Acknowledge)
b0:
Notification must not be acknowledged
b1:
Notification must be acknowledged with protocol [0x32] Clear Data Buffer