OBID
®
classic-pro
Montage
ID CPR.02.VP/AB-x
FEIG ELECTRONIC GmbH
Seite 11 von 36
M30800-1de-ID-B.doc
3.2 Spannungsversorgung
Die Spannungsversorgung erfolgt über die Klemmen [+ /
~
] und [- /
~
]. Das Gerät kann wahlweise
mit 12 - 24 V AC oder DC versorgt werden. Die Polarität bei DC Spannungsversorgung kann frei
gewählt werden.
HINWEIS:
Die Zuleitung sollte nicht direkt parallel mit anderen Energieversorgungs- und Niederspan-
nungsleitungen verlegt werden.
3.3 Relais (ID CPR.02.VP/AB-B)
Der Leser verfügt über ein Relais mit einem Schließerkontakt. Der Anschluss erfolgt über die
Klemmen [NO] und [COM].
3.4 Digitale Eingänge
Die digitalen Eingänge [IN1], [IN2] und ([IN3]) dürfen nur gegen intern GND, Klemme [GND] ge-
schaltet werden (siehe Abbildung 6).
Eine Beschaltung mit Fremdspannung kann zur Zerstörung des Gerätes führen!
Abbildung 6: Anschluss der digitalen Eingänge
3.5 RS232-Schnittstelle (ID CPR.02.VP/AB-A)
Leser mit RS232-Schnittstelle werden gem. Abbildung 7 mit dem Leitrechner verbunden.
Abbildung 7: Anschluss der RS232-Schnittstelle
Host
R/A
T/B
GND
ID CPR.02-A
RxD
TxD
GND
INx
GND