OBID
i-scan
®
UHF
Manual
ID ISC.MU02.02
FEIG ELECTRONIC GmbH
Page 10 of 96
H90701-3e-ID-B
4. Introduction
4.1. The OBID i-scan
®
ID ISC.MU02 Reader
The ID ISC.MU02 Short Range Reader is a high flexible and cost effective Reader which is aimed
for UHF applications which work with a short read range and a reduced RF power. The ID
ISC.MU02 is available in two versions.
•
ID ISC.MU02.02-CU with a USB interface and a RS232-LVTTL interface.
•
ID ISC.MU02.02-AD version with RS232 and Data Clock Interface.
The different interface versions enable the connectivity to several host systems. Each version of
the ID ISC.MU02.02 product series has the following key RF features:
•
Powerful RF interface to work with maximum speed in European or US DRM (Dense Reader
Mode)
•
RF front end with blocking features to supporting adjacent channel operation of RF Readers.
•
Reader protection against various fault conditions as e.g. antenna shortcut and electrostatic
discharge.
•
Reader is available in different versions to fulfil the different national radio rules of UHF.
In addition to the ID ISC.MU02.02 Reader series provides configuration possibilities and a reader
command set. The base set of commands and features are compatible with the commands used
within the OBID i-
scan
product line. The configuration possibilities of the ID ISC.MU02.02 reader
makes it easy to adapt the reader to wide a range of applications by software and hardware con-
figurations.
The RF section of the reader is controlled by a dedicated ARM controller and a FPGA based RF
decoder.
In combination, the powerful and flexible RF transmitter and receiver and the intelligent digital con-
troller form the basis of an agile, multi-protocol reader that can be updated as future protocols and
features are created. The Reader supports the transponder protocols Class1 GEN2,
optional
ISO18000-6-C.
FEIG Electronic provides a library which allows the user to develop their own host applications to
exchange data with the ID ISC.MU02.02.
