OBID i-
scan
®
Installation
ID ISC.ANT1700/740-SLA/-SLB
FEIG ELECTRONIC GmbH
Page 60 of 66
M00210-2e-ID-B.doc
Maximum transmitting power per
antenna
4 W
Permissible overall transmitting
power per antenna gate
– EU-territory (per EN 300 330) and
other CEPT nations
4 W
Outputs
– 1 Optocoupler
– 1 Differential Output
– 1 Relay ( 1 x Changeover)
24 V
/ 30 mA
Reader Synchronization
24 V
/ 1 A for Alarm Kit
Inputs
– 1 Optocoupler
– 1 Differential Input
Max. 24 V
/ 20 mA
Reader Synchronisation
Interfaces
RS232
RS484 / RS422
Ethernet (TCP/IP)
Compact Flash II
(WLAN)
Protocol Modes
FEIG ISO HOST
BRM (Data Filtering and Data Buffering)
Scan Mode (RS 232/485/422)
Notification Mode (TCP/IP)
Supported Transponders
ISO 15693, ISO 18000-3-A, (EM HF ISO
Chips, Fujitsu HF ISO Chips, KSW Sensor
Chips, Infineon my-d, NXP I-Code , STM ISO
Chips, TI Tag-it)
NXP I-code 1, I-Code UID, I-Code EPC
Ranges / pass-through width in gate
with multiplexer
– One tag orientation
– All tag orientations
approx. 150 / 160 cm**
approx. 120 / 130 cm***
Antenna connection
1 x SMA plug (50
)
Antenna connector cable
- Type A
- Type B
RG58, 50
, approx. 1,35 m long
RG58, 50
, approx. 8,55 m long
