IDENTIFICATION
Installation
ID ISC.ANT1520/680-A/-B
FEIG ELECTRONIC GmbH
Page 28 of 82
ID ISC.ANT1520680-A-B User
Manual_M61112-1e-ID-E-
060317.doc
Find here the wire connection between antenna Type A and B
At a single gate with 2 antennas a connection between X13 GPC-out of the terminal board in
Antenna Type A and X13 GPC-out of the terminal board in Antenna Type B must be installed.
The side with the ferrite core must be placed in the antenna Type B.
Fig. 14 Connection between the antennas at a single gate
At a double gate with 3 antennas a connection between
X13 GPC-out of the terminal board in Antenna Type A and X13 GPC-out at the 1. Antenna Type B
and X13 GPC-out of the terminal board in Antenna Type A und X13 GPC-out at the 2. Antenna
Type B must be installed. The sides with the ferrite core must be placed in the antenna Type B.
Fig. 15 Connection between the antennas at a double gate
Basically X13 GPC-out of the terminal boards of all used antennas must be connected from
antenna to antenna 1:1 in parallel.
ANT1520680-B
ANT1520680-A
LED-light
1. People Counter
Antenna No.1
ANT1520680-A
LED-light
1. People Counter
LED-light
Antenna No.2
ANT1520680-B
Antenna No.3
ANT1520680-B
