IDENTIFICATION
ID ECCO Smart HF-BLE
Operation
USER GUIDE
Page 10 of 25
5.3 USB
–
Interface
There is a Mini USB-socket 9 on the base for the connection of the USB-Interface. The pin out is
standardized. The data rate is reduced to 12 Mbit (USB full speed). A standard USB-cable can be used.
Fig. 3: 9 - USB-Interface
Note:
The length of the USB-
cable can be a max. of 5 meter. It isn’t allowed to use longer cables!
5.4 Device Hardware Reset
Fig. 4: Hardware reset: Press button no. 7 and 8
To perform a hardware reset of the ID ECCO Smart press and hold the keys 7 and 8 for minimum 10
seconds.
NOTE:
Specific configuration settings and data will not be lost by the reset.
