IDENTIFICATION
ID MAX.U500i
4 Installation
Page 8 of 36
4 Installation
Installation
The ID MAX.U500i is designed to be mounted outdoors on a VESA bracket. The reader should be mounted
with the connections facing downwards to ensure tightness as shown below. Four holes for M5 screws are
provided on the backside of the housing for mounting on the VESA bracket. The screws used should have a
screw-in depth of maximum 8 mm. The housing can be opened by means of a hinge Therefore loosen the
screws marked blue in Fig.
1
and swing away the front part of the reader. During installation, the dimensions
of the reader when opened should be taken into account (see Fig.
3
). For secondary protection the reader
should be secured by means of an eye bolt (see Fig. 4), that should be fixed with screw locking varnish, and
e.g. a wire rope. The suitable accessory ID ANT.UEB-A can be purchased from FEIG ELECTRONIC.
Fig. 1: Dimensional drawing – back view
