Feider Machines FSO20254, Instruction Manual

Page: 22 / 26

ORIGINAL INSTRUCTIONS
22
6. TROUBLESHOOTING
PROBLEMS POSSIBLE CAUSES SOLUTIONS
The motor does not start 1. Under voltage
2. Poor connection
Check the connections and the
mains voltage.
The motor does not start
and disconnects.
1. Short circuit in the socket
2. Short circuit in the motor
3. Bad fuse, or cut circuit breaker
1. Check the plugs
2. Inspect the connections on the
machine
3. Check the fuses
The motor heats up The motor is overloaded Reduce the load on the motor
The rotation speed drops 1. The motor is in short circuit
2. The tension drops
3. Bad fuse
4. Overheating engine
1. Check the connections on the
motor and the insulation of the
connections
2. Check the voltages and fuses
3. Reduce the load
The machine vibrates,
trembles
1. The saw blade is not circular
2. The saw blade is damaged
3. The saw blade is badly fixed
1. Replace or sharpen the saw
blade
2. Replace the blade with a
suitable blade adapted for the
materials to cut
3. Tighten the screw of the shaft
Burn points appear on the
workpiece
1. Malfunction
2. The saw blade is dull or not
suitable
1. Replace or sharpen the blade
2. Replace the blade with a
suitable blade for the materials to
cut
The cutting angle is not
accurate
1. The alignment is bad 1. Check the tightness of the
different axes
The blade engine block
oscillates
1. The pivot is moving 1. Check the tightness of the
pivot
7. DISPOSAL
Electrical products should not be discarded with household products. According to the European
Directive 2012/19/EU on waste electrical and electronic equipment and its implementation into national
law, electrical products used must be collected separately and disposed of at collection points provided
for this purpose. Talk with your local authorities or dealer for advice on recycling.