ORIGINAL INSTRUCTION >EN
Information
The declared vibration total value has been measured in accordance with a standard test
method and may be used for comparing one tool with another;
The declared vibration total value may also be used in a preliminary assessment of
exposure.
Warning:
That the vibration emission during actual use of the power tool can differ from the
declared total value depending on the ways in which the tool is used; and
of the need to identify safety measures to protect the operator that are based on an
estimation of exposure in the actual conditions of use (taking account of all parts of the
operating cycle such as the times when the tool is switched off and when it is running idle
in addition to the trigger time).
Wear hearing protection.
4, OPERATING INSTRUCTIONS
FOREWORD
The Drywall Sander is designed for sanding walls and ceilings that are made of drywall or
plaster. The Sander provides a superior finish, and is faster than conventional finishing
methods for both new construction and renovation work. Clean-up time is minimized by
the use of an external Vacuum Cleaner attached to the Sander.
ABRASIVE DISC SELECTION
The Drywall Sander is shipped with a set of 80/100/120/150/180/240grit, abrasive disc
installed. This abrasive is suitable for most applications. Abrasive discs of 120 grit and 240
grit are available for situations requiring a smoother finish.
HOW TO HOLD A DRYWALL SANDER
The Drywall Sander should be held with both hands on the main tube. The hands may be
positioned anywhere along the main tube to provide the best combination of reach and
leverage for the particular application.
CAUNTION:
Keep hands on Main Tube. Do not place hand into area around the sanding
head. The sanding heads swivels in multiple directions and could pinch hand.
CONNECT DRYWALL SANDER TO VACUUM CLEANER
08
