Choose a high speed for scratching.
Work on a soft surface (e.g. wood) with a flat angle and minimum pressure.
Otherwise, the scraper can cut into the surface.
9. CLEANING AND MAINTENANCE
Before any work on the machine, disconnect the mains plug.
• Keep the air vents clean to prevent overheating of the motor.
• Regularly clean the frame of the machine with a soft cloth, preferably after
each use.
• Keep the air vents free from dust and dirt.
• If there is tough dirt, use a soft cloth moistened with soapy water.
• Never use solvents such as gasoline, alcohol, ammonia, etc. These solvents
may damage the plastic parts.
Check that the water can never penetrate the power tool!
10. TECHNICAL DATA
Voltage
230-240 V
Frequency
50 Hz
Power
400 W
No-load speed
15 000-22 000 min
-1
11. NOISE
Values of sound emissions measured according to the applicable standard. (K=3 dB)
Acoustic pressure, LpA
84 dB (A)
Sound power, LwA
95 dB (A)
CAUTION! When the acoustic pressure exceeds the value of 85 dB (A), you
have to wear individual hearing protection devices.
aw (Vibrations):
3.86 m/s
2
K = 1.5 m/s
2
Information
The declared vibration total value was measured by a standard test method and may be
used for comparing one tool with another.
The declared total vibration value can also be used in a preliminary exposure estimate.
Warning:
Summary of Contents for FMT360
Page 8: ......
