10
5.SERVICNG AND MAINTENANCE
Keep your tool on a regular basis. This will keep your tool in good working order and extend its lifespan.
Do not use abrasive or corrosive agents to clean the tool. These types of products damage your tool.
Do not make any repairs by yourself. Repairs and inspections should be carried out by a competent person or an
authorized service center (please contact your dealer).
a.
After each use
Check the condition of the accessories and the tool body (cleanliness, wear, damage, etc.). If you notice any
damage, wear or malfunction, do not use the tool and take it to a qualified service for inspection and repair.
b.
Carbon brushes
One set of carbon brushes are provided with the tool. When the carbon brushes are worn, it can be replaced
by the new provided one. Bring your tool to our service center for the maintenance and replacement of the carbon
brushes.
c.
Servicing
No specific maintenance is required by the user. After each season, please bring the tool to an authorized
service center for general machine maintenance.
d.
Spare parts
You can order spare parts directly from our service center. Please place your order according to the type of
machine and the part number indicated in the explosion drawing.
If replacement of the cable is necessary, this must be done by the manufacturer or his agent to avoid a hazard.
e.
Storage
-
After use and cleaning, please keep your tool.
-
Store the tool in a clean, dry place, preferably in its box.
-
When transporting and storing, always put the protective cover on the blade.
-
The tool should be stored away from children and pets.
-
Avoid exposing the tool to direct sunlight.
6. DISPOSAL
Electrical products should not be discarded with household products. According to the European Directive
2012/19/EU on waste electrical and electronic equipment and its implementation into national law, electrical
products used must be collected separately and disposed of at collection points provided for this purpose.
Talk with your local authorities or dealer for advice on recycling.
