Use of AC Power
Connect the ground bolt.
Start the engine in accordance with the “Start the Engine” requirements.
Make sure the connected device is turned off, then connect the device to the generator.
When the power indicator (green) is on, turn on the connected device.
BE CAUTIOUS
If the connected device is not turned off before you start the generator, it will start suddenly,
resulting in personal injury.
If the generator is overloading or the connected device is internally faulty, the power indicator
(green) will go off and the overload indicator (red) will light up and there is no power output. The
generator will still keep running until you turn the start switch to “OFF” position.
Power indicator, Overload indicator and Oil alarm indicator
：
Under normal operating conditions, the power output indicator (green) is on.
If the generator is overloading or the connected device is internally faulty, the power indicator
(green) will go off and the overload indicator (red) will light up and there is no power output.
If the overload indicator is on, please unplug the connected device from the generator, turn off the
device, check the device and the connecting cable, confirm the cause of the overload. After you find
out the cause of the overload and confirm that the problem has been resolved, press the Reset
Button on the control panel. After 3 seconds the indicator will turn green and the generator will start
operating normally.
If you press the Reset Button, wait 3 seconds and the indicator on the generator doesn’t turn green,
please turn off the generator and contact the authorized dealer.
If the oil alarm indicator is on, the engine will automatically shut down. Please check whether the oil
should be added.
15
