background image

1. SAFETY INSTRUCTIONS

WARNING! When using this type of garden tool, basic precautions should always be followed

to reduce the risk of fire, electric shock and injury.

Read all instructions carefully before attempting to use this product and retain these

instructions. Be familiar with all the operations described in these operating instructions. This

product must be operated by experienced users.

Inexperienced users shall first be trained in all operations by a professional.

If you are giving this machine to others, please also provide them with this instructions manual.

Take into account all the markings affixed to the product (symbols, labels, technical information,

etc.). The symbols are explained in this manual.

Use this machine as described in this instruction manual. It is strictly forbidden to use this tool

for applications other than those described in this manual.

Failure to follow these instructions can result in serious injuries and, in some cases, death.

This product is intended for private domestic use only. Do not use it for commercial purposes.

Never let people unfamiliar with these instructions or children use this product.

National regulations may limit the use of the machine.

People under the age of 18 must not use this product

Keep in mind that the operator or user is responsible for accidents or risks to other persons or

their property.

Do not use the tool if you are drunk, tired, under the influence of drugs or ill. Do not use the tool

if you are not in an adequate physical condition.

This tool is intended for outdoor use. Never use it indoors.

When transporting the machine:

o

Secure the machine during transport to prevent loss of fuel, damage or injury.

o

Use a carrying case to protect the cutter during transport.

Keep people and animals away from the work area. Children and people who do not know how

to use this tool should not touch it and handle it.

Keep them at least 15 m from the machine during operation,

Use the product only under daylight or under good artificial light.

When using the machine, always wear full protective equipment including a helmet, protective

mask, ear protection, glasses, gloves, non-slip footwear and protective clothing.

Wear appropriate clothing. Do not wear loose or unbuttoned shirts. Do not wear jewellery that

may come in contact with moving parts. If you have long hair, tie it down and wear an

appropriate safety helmet.

Do not operate the product with damaged guards or shields in place.

Keep hands and feet of the appliance at all times and especially when turning the appliance off

and on.

Do not use the tool in an area where ventilation is poor. Gas emissions can cause injury.

Do not use the tool in the presence of flammable liquids or gases.

Caution: The machine releases gases when it is used. Avoid coming into contact with these

gases.

Keep the work area clear. Before working, inspect the work area and remove any materials or

objects that could cause accidents.

Do not force the tool.

Use only accessories supplied or recommended by the manufacturer (such as saw chain and

guide bar combinations). Using other accessories may cause an accident. Refer to the

03

Summary of Contents for FELPRO25-AC


























Reviews: