-
The front hand guard is a device intended to protect the operator's hand against injuries
caused by contact with the chain.
-
The chain brake is a device that automatically stops the chain in case of backward movement,
causing the saw to jump.
-
The chain is the cutting device, installed on the chain guide.
b. Technical data
Model
FELPRO25-AC
Type of engine
1E34FC (air cooled 2-stroke petrol engine)
Fuel Tank Volume
230cm³
Oil tank volume
160cm³
Idle speed of the engine
3300±300/min
Clutch speed
4600/min
Displacement
25.4cm³
Maximum chain speed
21m/s
Maximum motor power
0.7kW
Maximum engine speed
11000/min
Weight (empty tank, without accessories)
3.5 kg
Cutting length
200mm
Chain pitch
9,525mm (0,375’’)
Gauge of chain
1,27mm (0,05’’)
Type of chain
91P040X/Oregon (10”),
Type of guide bar
100SDEA041(537599)/Oregon
Sprocket (number of teeth x pitch)
6 teethes 9,525
Carburettor
WT962/Walbro, 1E34FC/Jingke,
1E34FC/Ruixing, MC14B/HLIC, MC14B1/HLIC,
MC14B2-3/HLIC, WT1198/Walbro,
MC1379BE/Huayi, MP13BZ/Stable
Spark plug
L8RTF/LD NHSP, L7T/LD, BM6A/LD,
L8RTF/Torch, L8RTF/BOSCH, BP MR7A/NGK,
L8RTC/CDK
Sound Pressure
LpA: 99 dB(A)
Uncertain K=3 dB(A)
Sound power
LwA : 108.3 dB(A) K=3 dB(A)
Guaranteed power level
LwA : 113dB(A) (2000/14/EC)
Value of vibration
Front handle 9,0 m/s², K=1,5m/s²
Rear handle: 8,5 m/s², K=1,5m/s²
3. ASSEMBLY
a. Assembly of the chain guide and saw chain
IMPORTANT: The machine must not be started during assembly. Wear protective gloves
when handling the blade.
Note: the spiked bumper is already mounted on the tool.
1) Pull the protective guard toward the front handle to check that the chain brake is not engaged.
2) Loosen the nuts and remove the chain cover.
3) Attach the bracket to the rear of the engine assembly with a screw.
09