EN
12
Do not use the device if it has suffered any heavy shcck or jolting, or
is damaged in any other way.
Due to the heat generated during charging, the battery charger
should not be operated on a combustible surface/in an inflammable
environment.
Do not cover the ventilating slits.
Never disassemble the device yourself.
Pull the plug of the battery charger out of the socket when it is not in
use or when cleaning it.
Only use extension cables that are approved and technically in
perfect condition.
During operation provide sufficient ventilation. Malfunction during
charging can be caused by storing and operating in places where the
temperature e40°C; this should be avoided. Battery
charging in closed cupboards, near heat sources (radiators, bright
sunshine) etc., causes heat to accumulate and can damage the
device.
If the battery is not going to be used for a longer period, pull the
battery off the battery charger and pull out the mains plug.
Protect battery contact to avoid a short circuit caused by metallic
object that can cause a fire or explosion!
Only charge original recommended batteries.
EN
9
6. CE DECLARATION
Declaration of conformity
FEIDER
BUILDER SAS
ZI, 32 RUE ARISTIDE BERGES
±
312070 CUGNAUX
±
FRANCE
Declares that the machinery designated below:
20V 2A(4A) LITHIUM ION BATTERY
Model: FBA20U2 / FBA20U4
Serial number:
Is in conformity with the requirements of the
Directive Machine 2006/42/EC
and to the followings Europeans
Directives:
EMC Directive 2014/30/EU
ROHS Directive 2011/65/EU
This tool is also in conformity with the following these standards:
EN 60745-1: 2009+A11: 2010
EN 60745-2-3: 2011+A2: 2013+A11: 2014+A12: 2014+A13: 2015
EN 55014-1: 2006+A1: 2009+A2: 2011 EN 55014-2: 2015
Responsible of the technical file: Mr Michel Krebs
Cugnaux, 19/11/2018
Philippe MARIE / PDG
