EN
6
4.2. CHARGE STATUS
(Fig.1)
To display the amount of charge left in the battery, press the charge level indicator button (3),
Charge level indicator
Amount of charge remaining
0-10%
10-25%
25-50%
50-75*
75-100%
5. MAINTENANCE AND STORAGE
MAINTENANCE
The batteries have been designed to provide maximum trouble-free life. However, like all batteries, they will eventually wear
out. DO NOT disassemble battery pack and attempt to replace the batteries. Handling of these batteries, especially when
wearing rings and jewellery, could result in serious burns.
To obtain the longest possible battery life, remove the battery pack from the charger once it is fully charged and ready for
use.
STORAGE
Store the battery pack where the temperature is below 27°C.
Store battery packs in a "charged" condition (minimum of 30%-50% charged).
To charge the battery pack after a six months storage period, it is recommended to discharge the battery about ^0%-20%
(by running it in a tool) and charge afterwards to maximize the battery lifetime.
6. SPECIFICATIONS TECHNIQUES
Model
FBA20U2
FBA20U4
Voltage
20V DC
20V DC
Capacity
2.0Ah
4.0Ah
Charge time
60 minutes
130 minutes
Cell type
Lithium-ion
Lithium-ion
EN
15
Avoid charging your battery in freezing conditions as charging power will not be sufficient.
When charging more than one battery pack in succession allow at least 30 minutes for the charger to cool down before charging an additional
battery.
Always remove the battery pack and store it safety when the tool is not in use.
Caution: If at any point during the charging process none of the LEDs are lit. remove the battery pack from the charger to avoid damaging the
product. DO NOT insert another battery.
MAINTENANCE AND REPAIRS
Service, testing and repairs should only be carried out by authorised service centres.
From time to time the ventilation slots on the motor casing should be cleaned out. If the unit should become defective, repair should be
performed by an authorized service agent.
Avoid using solvents when cleaning plastic parts.
Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by l^eir use. Use clean cloths to
remove dirt, dust, oil, grease, etc.
Warning! Do not at any time let brake fluids, gasoline, petroleum based products, penetrating oils, etc., come in contact with plastic parts.
Chemicals can danage, weaken or destroy plastic which may result in serious personal injury.
STORAGE
Store your charger in a cool dry place between 10 & 25°C. It is not recommended to leave it in a cold works van overnight. Ensure no metal
filings or swarf can fail into the vents during storage, as this may cause serious injury when it is next used.
6. SPECIFICATIONS TECHNIQUES
Voltage 220-240V~50Hz/60Hz,60W
Output
21V DC 2.4A LITHIUM ION
7. Symbols explication
Do not dispose of old appliances with domestic rubbish .
To reduce the risk of injury, the user must read and understand this
manual before using this product.
Conforms to relevant safety standards
