EN
8
8 DISPOSAL
Electric power tools, as well as their accessories and packaging, must each be able to follow an appropriate
recycling pathway. Only for the countries of the European Union:
Do not throw away your electrical appliance with the household waste! In accordance with the European
Directive 2012/19/EU on waste electrical and electronic equipment and its implementation in national laws,
power tools that can no longer be used must be separated and follow an appropriate recycling pathway.
EN
13
Ϯ͘/ŶƚĞŶĚĞĚhƐĞ
The battery charger is specially design to work with Feider Li-ion battery as below.
FBA20U2
20V 2A LITHIUM ION BATTERY
FBA20U4
20V 4A LITHIUM ION BATTERY
3. COMPONENTS ( FIG.1)
1 Battery
port
2
RED ETD indictor
3 Green
ETD
indictor
4. OPERATION
4.1. Charging the battery pack
Battery pack
FBA20U2
FBA20U4
Warning ! Only charge in compatible 20V chargers. Use of other chargers may result in fire, damage or serious personal injury.
4.2 CHARGING PROCEDURE
When charging a new Li-Ion battery it should be fully discharged followed by a full charge for the charging rate for the battery as stated in the
product manual plus 30 minutes. This should then be followed by a full discharge and a further full charge for the charging rate for the battery
as stated in the product manual plus 30 minutes. This procedure will condition the battery and equalise the cell voltages. Following this
1
2
3
